Amtico Cleaning Guide

Amtico floors are designed to be practical, attractive and easier to live with than many traditional floor types.

That does not mean they always stay looking their best without the right maintenance.

Over time an Amtico floor can start to look dull, patchy or hard to clean. Sometimes this is straightforward soiling. Sometimes it is old product residue, worn dressing, surface abrasion or damage that cleaning alone cannot fix.

The important thing is to assess the floor before deciding what it needs.

Why Amtico floors become dull

Amtico and other LVT floors often lose appearance gradually.

Common causes include:

• fine grit and abrasion
• detergent residue
• old polish or dressing
• greasy kitchen soil
• traffic lane wear
• over-wetting
• incorrect cleaning products
• ingrained dirt around textured areas

In many homes, the floor is mopped regularly but still looks flat. That can happen when detergent residue is left behind after every clean. The residue then attracts more soil, so the floor looks dirty again quickly.

What professional cleaning may help with

Professional LVT cleaning may help when the issue is mainly soil, grease or residue.

It can often improve:

• dull surface appearance
• sticky residue
• ingrained traffic lanes
• mop marks
• greasy kitchen build-up
• old maintenance product build-up
• uneven-looking areas caused by contamination

The result depends on what has happened to the floor. If the surface has worn through, scratched deeply or suffered physical damage, cleaning can improve cleanliness but may not restore the original finish.

Cleaning, dressing and recoating are different

Amtico care can involve different levels of work.

Cleaning removes soil and residues.

Dressing or protective finish work may help some floors where suitable, but it depends on the floor type, condition and product compatibility.

Recoating, repair or replacement are different decisions again and should not be promised casually.

The correct option depends on:

• floor condition
• product history
• room use
• existing coatings
• manufacturer guidance
• customer expectations

What professional cleaning will not fix

Cleaning will not repair:

• deep scratches
• cut or gouged tiles
• loose planks
• failed adhesive
• moisture damage
• gaps caused by movement
• permanent wear
• subfloor problems

If those issues are present, a flooring installer or repair specialist may need to advise. Cleaning can still be useful, but it should not be presented as a repair.

Routine care for Amtico floors

Good routine care usually includes:

• dry sweeping or vacuuming grit regularly
• using manufacturer-suitable cleaning products
• avoiding excessive detergent
• wiping spills promptly
• avoiding abrasive pads
• using entrance mats that are suitable for LVT
• reviewing worn traffic lanes before they become severe

Grit is one of the biggest problems because it acts like fine sandpaper under shoes, chairs and furniture.

When to seek professional help

Professional help is sensible when:

• the floor looks dirty soon after mopping
• the surface feels sticky
• traffic lanes stay dark
• old polish or residue may be present
• the floor has become patchy
• a rented property needs a reset before handover
• commercial footfall has overwhelmed routine cleaning

Our guide on why LVT flooring looks dull explains the most common causes in more detail.

The honest answer

Amtico cleaning can make a big difference when the problem is soil, grease or residue.

It cannot turn damaged flooring into new flooring, and it should not be confused with plank repair or replacement.

The safest approach is to assess the floor, clean it with a suitable method, and only discuss dressing, protective finish or repair options where the floor condition supports them.